No 30081-160 Screwdriver 1.60mm Swiss Made

This 1.6 mm driver handles bridge screws, case clamps, and larger movement hardware across the bench. We turn the body from stainless steel with a knurled grip that keeps the fingers steady under light downward pressure. The head turns freely while you work the screw home.

Parallel ground tip

The flat tip matches standard screw slots without wedging against the slot walls. We grind the flanks parallel so the blade seats deep into the screw head and bears evenly across the full width.

Knurled steel handle

We cut the knurling directly into the stainless steel barrel to give your fingertips purchase during light turns. The grip stays positive even when working dry at the bench.

Free swivel head

The top head rotates smoothly on the upper barrel. You keep steady downward pressure with the index finger while the thumb and middle finger spin the body through the thread.

Blade replacement

A small grub screw on the side of the ferrule locks the blade in place. Back it off to pull a worn blade and seat a fresh 1.6 mm tip.