$24.99

No 30081-250 Screwdriver 2.50mm Swiss Made
3.9 from 6 notes
Our 2.50 mm screwdriver carries a broad flat blade ground for larger bridge screws and heavy casing fasteners on the movement bench.
$27.00
Prices are as our retail partner last showed them.
| Reference | 30081-250 |
|---|---|
| Reference line | 30081 |
| Drawer | Screwdrivers & Blades |
| Working width | 2.5 mm |
| What it is | A tool in its own right |
| Bench job | Working on the movement |
Large movement screws need a blade that fills the slot from side to side without rocking. We turn the body of No 30081-250 from stainless steel and fit it with an elastomer band for a firm hold. The top cap turns on its own axis while your index finger stays planted.
Wide ground blade
The 2.50 mm tip is ground flat and parallel across its working face. It seats deep into wide screw slots so torque passes evenly across both shoulders rather than bearing down on the corners.
Knurled body and grip
We knurl the stainless steel barrel and set a grooved band into the middle section. Your fingertips find purchase close to the blade, where fine adjustments on bridge screws happen.
Swivel cap action
The cap rotates freely under light downward pressure from your finger. You can turn the barrel between thumb and forefinger without lifting the tip out of the screw head between partial rotations.
Blade replacement screw
A small grub screw set into the side of the ferrule clamps the blade shank. When a tip dulls or chips on a stubborn screw, loosen the set screw and slide in a fresh blade.
The rest of the 30081 line
$26.95
$25.95
$24.50
A note that touches this tool
Reading a catalogue number
What the parts of a Bergeon reference number mean, why the number is how a tool is asked for, how a suffix marks a size or a variant of the same family, and how to find the spare blade for a handle you already own.
Choosing a blade width
Why a screwdriver is chosen by the width of its blade rather than by its name, what happens to a screw head when the blade is a step too narrow, how the blades are stepped through the range, and how a worn blade is dressed or swapped.
30081-250
$27.00



