7024-P03

Set of 3 ANTIMAGNETIC Tweezers B-Jet

5.0 from 9 notes

Three antimagnetic B-Jet tweezers for movement work, grouped under reference 7024-P03 with tip patterns 1, 3, and 5.

$119.00

Prices are as the listing last showed them.

Reference	7024-P03
Reference line	7024
Drawer	Tweezers & Pickups
What it is	A tool in its own right
Bench job	Working on the movement

We assemble three B-Jet antimagnetic tweezers under reference 7024-P03 for the movement bench. The selection gathers our 7024-1, 7024-3, and 7024-5 patterns in one place. Each pair gives a different reach and tip taper for handling springs, wheels, and bridge screws without drawing magnetic charge into steel parts.

Selected tip profiles

Our 7024-1 brings stout general points, the 7024-3 thins down for narrow clearances, and the 7024-5 finishes in fine points for hairspring and balance work. You change patterns as the scale of the component shrinks.

Antimagnetic alloy

The shanks are formed from an antimagnetic alloy suited to open calibres. Steel pivots and balance tacks stay unmagnetized while you lift, position, or release them over the mainplate.

Spring tension and grip

The arms meet with light resistance so your fingers gauge the hold on a jewel setting or screw shank directly. Ribbed flats keep the tool seated against the thumb during steady placement.

Dressing the points

When points wear or take a burr from hard contact, dress them on an India stone and finish on Arkansas slip. Keep the inside faces parallel and smooth so parts do not shoot sideways.