55-606 30080 Set of 10 Screwdrivers with 10 Tubes with Spare Blades in

A screwdriver blade must fit the screw slot across its full width without riding the edges. We build this 30080 set around ten distinct blade widths, pairing each knurled driver with a dedicated storage tube of spare blades. The fitted wooden box keeps the run organized right at the bench.

Chrome plated handles

We turn each handle from brass and chrome plate the barrel. Fine knurling provides purchase for the thumb and forefinger while the swivel head turns freely under the index finger.

Graduated flat blades

The set covers widths from 0.5 mm and 0.6 mm for fine bridge work up to 2.5 mm and 3.00 mm for case screws. Each flat blade profile matches the straight walls of the slot.

Dedicated spare tubes

Each size comes with its own capped tube holding replacement blades. When a tip wears down or chips under torque, you swap in a fresh blade by loosening the set screw on the ferrule.

Fitted bench box

The wooden case holds each tool and its corresponding tube upright and in order. You can identify the diameter you need immediately by the colored ring on the driver shank.