Ergonomic Screwdriver 0.60mm White

We size this driver for the finest screws inside a movement. The flat blade fits narrow slots, while the white ring identifies the 0.60 mm width on your rack. Your index finger rests on the swivel head while your thumb and forefinger turn the knurled barrel below.

The blade profile

We grind the parallel flats down to 0.60 mm so the tip reaches the bottom of the screw slot. It seats squarely across the full width rather than pinching the top edges.

White colour code

The coloured ring tells you the tip width without picking up the tool or reading an engraving under magnification. White marks our 0.60 mm size across our movement benches.

Swivel head action

The cap turns freely on top of the barrel. It takes the steady downward pressure of your index finger while your other fingers rotate the knurled grip below.

Replacing the tip

The side set screw clamps the blade inside the shaft. Back out the screw with another driver, slide out the broken or worn blade, and seat a fresh one.